Modulus of Elasticity, Strength Properties of Non-Metals Ultimate Strength, Yield Strength

Modulus of Elasticity, Strength Properties of Non-Metals Ultimate Strength, Yield Strength, Modulus of Elasticity

Table of Modulus of Elasticity, Strength Properties of Non-Metals Ultimate Strength, Yield Strength, Modulus of Elasticity

Material	Ultimate Strength x 1000/in²		Yield Strength (0.2 % offset) x 1000/in²	Modulus of Elasticity x10⁶/in²
Material	in Tension	in Shear	Yield Strength (0.2 % offset) x 1000/in²	in Tension E	in Shear G
Aluminum Alloys, Cast
Sand cast	10 to 35	14 to 26	8 to 25	10.3	......
Heat treated	20 to 48	20 to 34	16 to 40	10.3	......
Permanent Mold Cast	23 to 35	16 to 27	9 to 24	10.3	......
Heat Treated	23 to 48	15 to 36	8.5 to 43	10.3	......
Die-Cast	30 to 46	19 to 29	16 to 27	10.3	......
Aluminum Alloys Wrought
Annealed	10 to 42	7 to 26	4 to 22	10.0 to 10.6	......
Cold Worked	12 to 63	8 to 34	11 to 59	10.0 to 10.3	......
Heat Treated	22 to 83	13 to 48	13 to 73	10.0 11.4	......
Aluminum Bronze, Cast	62 to 90	......	25 to 37	15 to 18	......
Heat Treated	80 to 110	......	32 to 65	15 to 18	......
Aluminum Bronze, Wrought
Annealed	55 to 80	......	20 to 40	16 to 19	......
Cold Worked	71 to 110	......	62 to 66	16 to 19	......
Heat Treated	101 to 151	......	48 to 94	16 to 19	......
Brasses, Leaded, Cast	32 to 40	25 to 31	12 to 15	12 to 14	......
Flat Products, Wrought	46 to 85	31 to 45	14 to 62	14 to 17	5.3 to 6.4
Wire, Wrought	50 to 88	34 to 46	......	15	5.6
Brasses, Non-Leaded
Flat Products, Wrought	34 to 99	28 to 48	10 to 65	15 to 17	5.6 to 6.4
Wire, Wrought	40 to 130	29 to 69	......	15 to 17	5.6 to 6.4
Copper, Wrought
Flat Products	32 to 57	22 to 29	10 to 53	17	6.4
Wire	35 to 66	24 to 33	......	17	6.4
Inconel, Cast	70 to 95	......	30 to 45	23	......
Flat Products, Wrought	80 to 170	......	30 to 160	31	11
Wire, Wrought	80 to 185	......	25 to 175	31	11
Lead	2.2 to 4.9	......	......	0.8 to 2.0	......
Magnesium, Cast, Sand and Permanent Mold	22 to 40	17 to 22	12 to 23	6.5	2.4
Die Cast	33	20	22	6.5	2.4
Magnesium, Wrought
Sheet and Plate	35 to 42	21 to 23	20 to 32	6.5	2.4
Bars, Rods and Shapes	37 to 55	19 to 27	26 to 44	6.5	2.4
Monel, Cast	65 to 90	63 to 162	32 to 40	19	......
Flat, Products, Wrought	70 to 140	......	35 to 130	26	9.5
Wire, Wrought	70 to 170	......	25 to 160	26	9.5
Nickel, Cast	45 to 60	......	20 to 30	21.5	......
Flat Products, Wrought	55 to 130	......	15 to 115	30	11
Wire, Wrought	50 to 165	......	10 to 155	30	11
Nickel Silver Cast	40 to 50	......	24 to 25	......	......
Flat Products, Wrought	49 to 115	41 to 59	18 to 90	17.5 to 18	6.6 to 6.8
Wire, Wrought	50 to 145	......	25 to 90	17.5 to 18	6.6 to 6.8
Phosphor Bronze Wrought
Flat Products	40 to 128	......	14 to 80	15 to 17	5.6 to 6.4
Wire	50 to 147	......	20 to 80	16 to 17	6 to 6.4
Silicon Bronze, Wrought
Flat Products	56 to 110	42 to 63	21 to 62	15	5.6
Wire	50 to 145	36 to 70	25 to 70	15 to 17	5.6 to 6.4
Tin Bronze, Leaded, Cast	21 to 38	23 to 43	15 to 18	10 to 14.5	......
Titanium	50 to 135	......	40 to 120	15.0 to 16.5	......
Zinc, Commercial Rolled	19.5 to 31	......	......	......	......
Zirconium	22 to 83	......	......	9 to 14.5	4.8